Lifting Points for bolting
Lifting Points for bolting There are 46 products.
-
INOX-STAR metric thread - RUD
Pentagonal design - clearly distinctive in comparison to the DIN 580 eye bolt.Identification : Clear WLL indication for the most unfavorable load direction F (not permissible for DIN 580). With a forged ring body out of the material 1.4462, 100% electromagnetic crack detected and with a 4 :1 design factor.
-
ASPA Adaptor - RUD
Thread adapters should only be used as a reducer for already existing threads to allow the attachment of high tensile RUD lifting points. The thread adapters ae marked with the inside and outside thread diameters.
-
VEBG 10/16 Load ring for bolting - RUD
The special relief lugs protect the securing bolt against bending and shearing loads. This provides additional safety. Stowable with smaller bolts and thus low profile. For further details refer to the product information sheet.
-
VRBG 31,5/50/150 - Load ring on plate for...
Load ring VRBS welded on a boltable plate.Smaller bolt diameter, favourable distribution of the introduced forcesFor further details refer to the product information sheet.
-
VABH-B Excavator hook - RUD
Excavator hook used as a lifting point for wire rope slings, round slings, and lifting means with an oval suspension ring or eye. With a stable safety latch, which is protected by a ridge similar to that of the VCGH.Thickened tip of the hook to avoid misuse. Thus hooking into smaller openings is impossible.
-
VCGH-G Excavator hook - RUD
Excavator hook used as a lifting point for wire rope slings, round slings and lifting means with an oval suspension ring or eye. With a stable hook securing mechanism comparable to that of the VCGH. Min. bolt quality is 10.9. Only the provided bolts should be used. The surface is pink powder coated. Pay attention to the permissible load direction.
-
RS Eye bolt, UNC/UN thread - RUD
With the following characteristics, distinctive in comparison to the conventional DIN - eye bolts; An octagonal shape symbolising quality class 8 Colored red, the identification color of quality class 8.
-
RM Eye nut, metric thread - RUD
With the following characteristics, distinctive in comparison to the conventional DIN - eye nuts; An octagonal shape symbolising quality class 8 Colored red, the identification color of quality class 8
-
WBPG Hoist ring on plate for bolting - RUD
With 6 pcs RUD-bolts M48. Removable suspension ring in the shape of a shackle for the attachment of cable-laid grommets (with heavy load cable eyes). Loadable from any side in the direction of pivot, thereby suitable for lifting and turning of loads. Swivel bolt with ball bearing (for a shock-free turning by 360°). Threaded holes for Starpoint-VRS, for...
-
SMILEY Lashing point for bolting - RUD
Lashing- and connection device at road vehicles for sea transport on Ro/Ro ships. Lashing point forged in one piece, noiseless, 100% crack detected.
-
THEIPA Point - F The advanced generation...
The THEIPA Point-F with an internal thread has been newly included in the range. All of the THEIPA Point’s advantages have also been considered in this case. The thread’s depth is 1.25 times its diameter as a rule. The stamped WLL applies to the kind of attachment by 90°. Bolts of the quality class 10.9 crack- tested are permitted as connecting elements.
-
FLAT Point enormously flat and good - JDT
The socket labelling and WLL must always be upwards when installing the screw. Secured four times against breakage in all load directions Enormously flat , Rotates 360°, Admissible working range of take-up link 110°, Automatically locking link
-
TAPG-S Attachment-point, bolt-on type - JDT
Attachment-point, bolt-on type, in working load limits of 3 - 8 t. Compact design Secured four times against breakage Working range 120° Bolt on plate also serves as marking stencil
-
RBG 3 Load ring for bolting - RUD
The relief lugs protect the securing bolt against bending and schearing loads. This provides additional safety.Stowable with smaller bolts and thus low profile.A forged ring according to EN 1677-1, quality grade 80, electromagnetic crack detected and coloured red. It is in compliance with the approval requirements of the respective employers' liability...
-
YOKE LBO Load ring
All YOKE Lifting points meet or exceed all the requirements of ASME B30.26. Quick and simple assembly, just a tapped hole is required.
-
YOKE SPK Eyebolt
The grade 100 YOKE SunPoint SPK eyebolts have particularly high Working Load Limits which can reach up to 12 tons.
-
YOKE WBO Swivel point
Extremely robust and corrosion-resistant YOKE-surface coating in characteristically yellow color. Threads from M8 up to M90.
-
PEWAG PLGW-SN Eye nut
Pewag’s new PLGW-SN lifting eye nut is the logical continuance to the successful PLGW product portfolio. This product is unsurpassed worldwide due to the main principle being based on tool-free installation.
-
PEWAG PLGWI Screw nut
The PLGWI screw nut is the corrosion-resistant version of the pewag PLGW lifting point and comes with the same benefits regarding dimensions, load capacities and mounting, thus enormously widening the range of possible applications.
-
DAW Lifting- and lashing rings
Swivel lifting- and lashing rings DAW ball bearing mounted, for lifting and lashing.
-
-
VRS STARPOINT - metrisch RUD
Star shaped design, a clear distinction from the DIN 580 eye bolt. Color: striking fluorescent pink powder coating. Identification: Clear WLL indication for the most unfavorable load direction F (not permissible for DIN 580).
