Lifting Points for bolting
Lifting Points for bolting There are 46 products.
-
PEWAG PLAW winner profilift alpha
Capacity 300 - 20 000 kg 360° rotatable lifting point. The load ring is loadable in a range of 130° and can be positioned at any required angle due to its replaceable and patented spring. Likewise interchangeable is the hexagon-special screw from grade 10.9 material, which is sesecured against loss.
-
PEWAG PLBW winner profilift beta
360° rotatable lifting point. The load ring is 180° movable and can be positioned at any required angle due to its replaceable and patented spring. Likewise interchangeable is the hexagon-special screw of grade 10.9 material, which is secured against loss.
-
PEWAG PLDW winner profilift delta
Capacity 600 - 16 000 kg Ball-bearing 360° under load rotatable lifting point. High resistant lifting eye 180° movable. The special screws are 100% crack-tested as well as protected against corrosion, and marked with WLL and thread size. Each lifting point is marked with an individual serial number, that allows traceability.
-
PEWAG PLGW winner profilift gamma
Pewag introduces a worldwide innovation to the market: a patented tool-free pewag winner profilift lifting point.
-
PEWAG AOR High-tensile lashing points
Capacity 3 150 - 36 000 kg For mounting machine parts or vehicle bodies. Ideal for hanging of lifting and lashing gear. Permissible usage Load capacity acc. to the inspection certificate respectively table of WLL in the mentioned directions of pull.
-
PEWAG RGS Alloy steel eyebolts
Capacity 400 - 4 000 kg The high-tensile eyebolt RGS is usable for lifting of machine parts. Eyebolts may only be tightened manually. Not suitable for diagonal pull. Permissible usage Load capacity acc. to the inspection certificate respectively table of WLL in the mentioned directions of pull – see picture 1.
-
SEB Swivel Eye Bolt CODIPRO
Capacity 300 - 15 000 kg The swivel eye bolt SEB is fitted with an automatic position recovery system for optimum orientation in the direction of the sling. This swivel eye bolt offers a high WLL in every direction.
-
SEB+C Swivel Eye Bolt + Centring CODIPRO
Capacity 300 - 15 000 kg The swivel eye bolt with centring SEB+C is fitted with an automatic position recovery system for optimum orientation in the direction of the sling. Thanks to its centring system (+C), the bolt is reinforced, when the eye bolt is fixed laterally on the charge to load.
-
FE.SEB Swivel eye nut CODIPRO
Capacity 300 - 10 000 kg The swivel eye nut FE.SEB is fitted with an automatic position recovery system for optimum orientation in the direction of the sling. It can be used with threaded parts in different lengths
-
DSR Double Swivel Ring CODIPRO
Capacity 50 - 6 300 kg The double swivel ring DSR has been especially designed to guarantee liftings under load. Its double articulation allows it to line up perfectly with the sling. This swivel ring is also available in stainless steel and can be used in a humid, corrosive, chemical,... environment.
-
DSR+C Double Swivel Ring + Centring CODIPRO
Capacity 50 - 6 300 kg The double swivel ring DSR has been especially designed to guarantee liftings under load. Thanks to the centring system (+C), the resistance of the axis is reinforced, when the swivel ring is fixed laterally on the charge to load.
-
FE.DSR - Female double swivel ring CODIPRO
Capacity 300 - 3 000 kg The female double swivel ring FE.DSR has been especially designed to guarantee liftings under load. Its double articulation allows it to line up perfectly with the sling. This swivel ring is also available in stainless steel and can be used in a humid, corrosive, chemical,... environment.
-
SS.DSR Stainless Steel Double Swivel Ring...
Capacity 300 - 3 000 kg Stainless steel version of the double swivel ring: SS.DSR This ring can be used in humid, corrosive, chemical, maritime,... environment.
-
DSS Double Swivel Shackle CODIPRO
With a WLL of up to 50 tons, the double swivel shackle DSS has been especially designed for liftings and turnings of heavy loads. The lifting ring DSS also has a very large shackle.
-
TSR + C Triple Swivel Ring + Centring...
The triple swivel ring, TSR+C, allows the hook to move parallel to the supporting face of the ring being drawn at 90° Thanks to its centring system (+C) the axis is reinforced, when the eye bolt is fixed laterally on the charge to load.
-
THEIPA Point The advanced Generation of...
Increase of working load limit by 25% without increasing swivel size compared to TAWGK. Easy to attach or dismantle due to the forged hexagon shaped body of the swivel. Crimpfeature on the link prevents the link from kinking. Both internal and external surfaces are protected against corrosion by a tough galvanized coating.
-
VLBG Load ring, metric thread - RUD
With a fully captive but easy to demount 100% crack detected hexagon head cap bolt. Load ring is stowable and pivots in all directions. The load ring must be flexible and adjusted to the load direction before being loaded. Ensure that there is no contact between the ring and the edges of the work piece. Avoid swiveling under full load.
-
VWBG-V Load ring, UNC thread - RUD
Suitable for all loads which swivel and tilt. Can be loaded in all directions with a 4 : 1 design factor. Swiveling under full load is permissible provided the inclination angle is not perpendicular to the screw - in direction. Not suitable for permanent swiveling under full load. Can also be supplied with variable (vario) thread lengths. Easy assembly...
-
VWBG Load ring, UNC thread - RUD
With increased WLL in axial direction and when load ring is aligned. Surface: Pink powder coated For all loads, which have to be flipped and turned-over. Loadable in any direction: Safety factor 4 Can be turned under load. Cannot be turned continuously in 90° direction at full load. Simple assembly, just a tapped hole is required. High tensile, tested...
-
VRM STARPOINT - Eye nut, metric thread - RUD
Star shaped design. A clear distinction from the DIN 582 eye nut.Color : A striking fluorescent pink powder coating.Identification : Clear WLL indication for the most unfavorable load direction F (not permissible for DIN 582)
-
VRS STARPOINT - metrisch RUD
Star shaped design, a clear distinction from the DIN 580 eye bolt. Color: striking fluorescent pink powder coating. Identification: Clear WLL indication for the most unfavorable load direction F (not permissible for DIN 580).
-
PP-S PowerPoint Star Universal connection,...
The first generation of lifting points with a universal connection for all slinging means (hook and ring assemblies, endles slings, round slings, loops etc). With a double ball bearing for jerk - free turning, swiveling and tilting. Even under full load can be turned in a 90° position from the bolt centre line. Not suitable for permanent swiveling under...
-
PP-B PowerPoint Ring connection, metric...
The first generation of lifting points with a double ball bearing for jerk - free turning, swiveling and tilting. The optimised design prevents the lifting points as well as the load from being damaged. Even under full load, can be turned in a 90° position from the bolt centre line. Not suitable for permanent swiveling under full load.
-
PP-VIP PowerPoint direkter...
The first generation of lifting points with a double ball bearing for the direct connection of the VIP chain. Version PP-VIP. Even under full load, can be turned in a 90° position from the bolt centre line. Not suitable for permanent swiveling under full load. Maximum WLL with the smallest thread diameter. Thread length : 18 mm
