Lifting points RUD
Lifting points RUD There are 20 products.
-
VLBG Load ring, metric thread - RUD
With a fully captive but easy to demount 100% crack detected hexagon head cap bolt. Load ring is stowable and pivots in all directions. The load ring must be flexible and adjusted to the load direction before being loaded. Ensure that there is no contact between the ring and the edges of the work piece. Avoid swiveling under full load.
-
VWBG-V Load ring, UNC thread - RUD
Suitable for all loads which swivel and tilt. Can be loaded in all directions with a 4 : 1 design factor. Swiveling under full load is permissible provided the inclination angle is not perpendicular to the screw - in direction. Not suitable for permanent swiveling under full load. Can also be supplied with variable (vario) thread lengths. Easy assembly...
-
VWBG Load ring, UNC thread - RUD
With increased WLL in axial direction and when load ring is aligned. Surface: Pink powder coated For all loads, which have to be flipped and turned-over. Loadable in any direction: Safety factor 4 Can be turned under load. Cannot be turned continuously in 90° direction at full load. Simple assembly, just a tapped hole is required. High tensile, tested...
-
VRM STARPOINT - Eye nut, metric thread - RUD
Star shaped design. A clear distinction from the DIN 582 eye nut.Color : A striking fluorescent pink powder coating.Identification : Clear WLL indication for the most unfavorable load direction F (not permissible for DIN 582)
-
VRS STARPOINT - metrisch RUD
Star shaped design, a clear distinction from the DIN 580 eye bolt. Color: striking fluorescent pink powder coating. Identification: Clear WLL indication for the most unfavorable load direction F (not permissible for DIN 580).
-
PP-S PowerPoint Star Universal connection,...
The first generation of lifting points with a universal connection for all slinging means (hook and ring assemblies, endles slings, round slings, loops etc). With a double ball bearing for jerk - free turning, swiveling and tilting. Even under full load can be turned in a 90° position from the bolt centre line. Not suitable for permanent swiveling under...
-
PP-B PowerPoint Ring connection, metric...
The first generation of lifting points with a double ball bearing for jerk - free turning, swiveling and tilting. The optimised design prevents the lifting points as well as the load from being damaged. Even under full load, can be turned in a 90° position from the bolt centre line. Not suitable for permanent swiveling under full load.
-
PP-VIP PowerPoint direkter...
The first generation of lifting points with a double ball bearing for the direct connection of the VIP chain. Version PP-VIP. Even under full load, can be turned in a 90° position from the bolt centre line. Not suitable for permanent swiveling under full load. Maximum WLL with the smallest thread diameter. Thread length : 18 mm
-
INOX-STAR metric thread - RUD
Pentagonal design - clearly distinctive in comparison to the DIN 580 eye bolt.Identification : Clear WLL indication for the most unfavorable load direction F (not permissible for DIN 580). With a forged ring body out of the material 1.4462, 100% electromagnetic crack detected and with a 4 :1 design factor.
-
ASPA Adaptor - RUD
Thread adapters should only be used as a reducer for already existing threads to allow the attachment of high tensile RUD lifting points. The thread adapters ae marked with the inside and outside thread diameters.
-
RBG 3 Load ring for bolting - RUD
The relief lugs protect the securing bolt against bending and schearing loads. This provides additional safety.Stowable with smaller bolts and thus low profile.A forged ring according to EN 1677-1, quality grade 80, electromagnetic crack detected and coloured red. It is in compliance with the approval requirements of the respective employers' liability...
-
VEBG 10/16 Load ring for bolting - RUD
The special relief lugs protect the securing bolt against bending and shearing loads. This provides additional safety. Stowable with smaller bolts and thus low profile. For further details refer to the product information sheet.
-
VRBG 31,5/50/150 - Load ring on plate for...
Load ring VRBS welded on a boltable plate.Smaller bolt diameter, favourable distribution of the introduced forcesFor further details refer to the product information sheet.
-
VABH-B Excavator hook - RUD
Excavator hook used as a lifting point for wire rope slings, round slings, and lifting means with an oval suspension ring or eye. With a stable safety latch, which is protected by a ridge similar to that of the VCGH.Thickened tip of the hook to avoid misuse. Thus hooking into smaller openings is impossible.
-
VCGH-G Excavator hook - RUD
Excavator hook used as a lifting point for wire rope slings, round slings and lifting means with an oval suspension ring or eye. With a stable hook securing mechanism comparable to that of the VCGH. Min. bolt quality is 10.9. Only the provided bolts should be used. The surface is pink powder coated. Pay attention to the permissible load direction.
-
RS Eye bolt, UNC/UN thread - RUD
With the following characteristics, distinctive in comparison to the conventional DIN - eye bolts; An octagonal shape symbolising quality class 8 Colored red, the identification color of quality class 8.
-
RM Eye nut, metric thread - RUD
With the following characteristics, distinctive in comparison to the conventional DIN - eye nuts; An octagonal shape symbolising quality class 8 Colored red, the identification color of quality class 8
-
WBPG Hoist ring on plate for bolting - RUD
With 6 pcs RUD-bolts M48. Removable suspension ring in the shape of a shackle for the attachment of cable-laid grommets (with heavy load cable eyes). Loadable from any side in the direction of pivot, thereby suitable for lifting and turning of loads. Swivel bolt with ball bearing (for a shock-free turning by 360°). Threaded holes for Starpoint-VRS, for...
-
SMILEY Lashing point for bolting - RUD
Lashing- and connection device at road vehicles for sea transport on Ro/Ro ships. Lashing point forged in one piece, noiseless, 100% crack detected.
-
VRS STARPOINT - metrisch RUD
Star shaped design, a clear distinction from the DIN 580 eye bolt. Color: striking fluorescent pink powder coating. Identification: Clear WLL indication for the most unfavorable load direction F (not permissible for DIN 580).
