Load binders
Load binders There are 17 products.
-
PEWAG RSWP Load binder
This universal load binder with an optimised lever length for one- and two-part lashing chain systems is suitable for direct lashing as well as for lashing down in the pewag winner pro Connex system.
-
PEWAG RSKWP Load binder
This load binder, newly developed by pewag, stands for safety at the highest level. It is suitable for direct lashing as well as for lashing down in the pewag winner pro Connex system.
-
PEWAG RSPSWP Load binder
This load binder for two-part lashing chain systems in accordance with EN 12195-3 is intended for the ZKWP lashing chain.
-
PEWAG ZRSWP / HSWP-HSWP-PSWP Lashing chain
This lashing chain surpasses the requirements of EN 12195-3 as it has a 50 % higher lashing capacity than standard G8 lashing chains.
-
PEWAG ZRSWP/ KHSWP - KHSWP-PSWP Lashing chain
This lashing chain surpasses the requirements of EN 12195-3 as it has a 50 % higher lashing capacity than standard G8 lashing chains.
-
PEWAG ZKWP/ HSWP-HSWP Lashing chain
This lashing chain is used for a two-part system and it surpasses the requirements of EN 12195-3 as it has a 50 % higher lashing capacity than standard G8 lashing chains.
-
PEWAG ZKWP/ KHSWP-KHSWP Lashing chain
Also this lashing chain is used for a two-part system and it surpasses the requirements of EN 12195-3 as it has a 50 % higher lashing capacity than standard G8 lashing chains.
-
PEWAG RSPSW Load binder G10
This load binder for two-part lasching chain systems in accordance with EN 12195-3 is intended for the ZKW lashing chain-the two are alwazs used in conjunction. The shortening hook with the PSW safety catch is already assembled.
-
PEWAG RSW Load binder
This loader binder for one-part lashing chains in accordance with EN 12195-3 is also suitable for frictional lashing, depending on the selected lever length.
-
PEWAG KSSW Clevis Turnbuckle
The grade 10 clevis system of this extremly robust turnbuckle is die-forged and tempered on both sides.
-
PEWAG RSPS Load binder G8
This load binder for two-part lashing chain system in accordance with EN 12195-3 is intended for the ZKW lashing chain.
-
PEWAG KSS Clevis turnbuckle G8
The clevis system of this extremly robust turnbuckle is die-forged and tempered on both sides, in compliance with grade 8 and manufactured according EN 12195-3.
-
PEWAG ZRSW / KHSW - KHSW - PSW Lashing...
ZRSW Lashing chains G10-For load securing with 25 % higher lashing capacity (LC) than conventional G8 lashing chains.
-
PEWAG ZRSW / KHSW - KHSW - KPSW Lashing...
ZRSW Lashing chains G10-For load securing with 25 % higher lashing capacity (LC) than conventional G8 lashing chains.
-
PEWAG ZKSW / KHSW - KHSW - PSW Lashing...
ZKSW Lashing chains G10-For load securing with 25 % higher lashing capacity (LC) than conventional G8 lashing chains.
-
PEWAG ZKSW / KHSW - KHSW - KPSW Lashing...
ZKSW Lashing chains G10-For load securing with 25 % higher lashing capacity (LC) than conventional G8 lashing chains.
-
PEWAG ZKW Lashing chains G10 as two part...
ZKW Lashing chains G10 as two part system: For load securing with 25 % higher lashing capacity (LC) than conventional G8 lashing chains.
