Lifting equipment
- Textile Lifting Slings
- Reťazové viazacie prostriedky
- Lifting clamps
- Upínacia technika
- Zdvíhacia technika
- Oceľové laná a viazaky
- Ratchet lever hoists
- Hand chain hoists
- Cable puller
- Steel jack
- Trolleys
- Beam clamps
- Electric chain hoists
- Manual winches
- Pneumatic chain hoists
- Pulley blocks
- Cable grips
- Crane Weighers and Loa indicator
- Lifting magnets
- Lifting points
- Hydraulic Jacks
- Hand pallet trucks
- Scissor pallet truck
- Manual drive stackers
- Electric pallet trucks
- Electric pedestrian stackers
- Hand pallet trucks with weighing system
- Elevating platform
- Load Moving Systems
- Electric winch
- Vacuum manipulators
- Vacuum hose lifting manipulators
- C-hooks
- Stacking hook
- Weld-on hooks
- Balancers
Lifting equipment There are 581 products.
-
YOKE LBO Load ring
All YOKE Lifting points meet or exceed all the requirements of ASME B30.26. Quick and simple assembly, just a tapped hole is required.
-
YOKE SPK Eyebolt
The grade 100 YOKE SunPoint SPK eyebolts have particularly high Working Load Limits which can reach up to 12 tons.
-
YOKE RGB Weld-on ring
Widely used on agricultural machines, trucks, steel hulled marine vessels and material handling equipment.
-
YOKE WBO Swivel point
Extremely robust and corrosion-resistant YOKE-surface coating in characteristically yellow color. Threads from M8 up to M90.
-
PEWAG WINPRO 300 Lifting chains
This chain has an added load capacity of at least 50 % compared to grade 8 and is manufactured in compliance with PAS 1061 (with modifications).
-
PEWAG AWP Master links
This is a standard master link for creating I- and II-leg chain slings using the CWP Connex connecting links.
-
PEWAG MWP Enlarged master links
It is used to create I- and II-leg chain slings using the Connex CWP connecting link and opens up universal connection possibilities thanks to the flattened section incorporated in its design.
-
PEWAG CWP Connex connecting link
This is a universal connecting link that consists of two die-forged, identical halves, a bolt and a safety sleev.
-
PEWAG HSWP Eye sling hooks
This eye sling hook is universally usable and comes with a forged and galvanised safety catch that locks into the tip of the hook, thereby providing excellent protection against lateral shifts.
-
PEWAG LHWP Safety hook
This safety hook corresponds to EN 1677-3 with a load capacity according to G12 and closes and locks automatically when placed under load, thereby offering even greater safety.
-
PEWAG PWP Grab hook
The standard shortening hook with BG-approval in the G12 programme is perfect both for the Connex and the welded system.
-
PEWAG PSWP Grab hook
This grab hook with safety catch for the winner pro Connex system is the standard shortening hook with a safety bolt in the G12 lashing programme.
-
PEWAG RSWP Load binder
This universal load binder with an optimised lever length for one- and two-part lashing chain systems is suitable for direct lashing as well as for lashing down in the pewag winner pro Connex system.
-
PEWAG WINNER 400 Round steel chains
Round steel chains pewag winner 400. According to EN 818-2 with increased load capacity.
-
PEWAG RSW Load binder
This loader binder for one-part lashing chains in accordance with EN 12195-3 is also suitable for frictional lashing, depending on the selected lever length.
-
PEWAG RSPSW Load binder G10
This load binder for two-part lasching chain systems in accordance with EN 12195-3 is intended for the ZKW lashing chain-the two are alwazs used in conjunction. The shortening hook with the PSW safety catch is already assembled.
-
PEWAG KSSW Clevis Turnbuckle
The grade 10 clevis system of this extremly robust turnbuckle is die-forged and tempered on both sides.
-
PEWAG CW Connex connecting link
The universal CW Connex connectiong link consists of two symmetrical, die-forged halves, one bolt and safety sleeve.
-
PEWAG KHSW Clevis sling hook
This universal clevis sling has a 25% higher lashing capacity than grade 8.
-
PEWAG HSW Eye sling hook
The eye sling hook may be used universally and comes with a die-forged safety catch that locks into the tip of the hook, thereby providing excellent protection against lateral shifts.
-
PEWAG PSW Grab hook with safety catch
This standard shortening hook ensures optimal interaction between chain and hook thanks to the special design of the chain contact area.
-
PEWAG AW Master link
Thanks to the flattened sections incorporated in the design, this master link opens up universal connection possibilities.
-
PEWAG KPSW Clevis grab hook with safety catch
This standard shortening hook ensures optimal interaction betweem chain and hook thanks to the special design of the chain contact, providing extra protection from accidental chain release.
-
PEWAG RSPS Load binder G8
This load binder for two-part lashing chain system in accordance with EN 12195-3 is intended for the ZKW lashing chain.
