Lifting equipment
- Textile Lifting Slings
- Reťazové viazacie prostriedky
- Lifting clamps
- Upínacia technika
- Zdvíhacia technika
- Oceľové laná a viazaky
- Ratchet lever hoists
- Hand chain hoists
- Cable puller
- Steel jack
- Trolleys
- Beam clamps
- Electric chain hoists
- Manual winches
- Pneumatic chain hoists
- Pulley blocks
- Cable grips
- Crane Weighers and Loa indicator
- Lifting magnets
- Lifting points
- Hydraulic Jacks
- Hand pallet trucks
- Scissor pallet truck
- Manual drive stackers
- Electric pallet trucks
- Electric pedestrian stackers
- Hand pallet trucks with weighing system
- Elevating platform
- Load Moving Systems
- Electric winch
- Vacuum manipulators
- Vacuum hose lifting manipulators
- C-hooks
- Stacking hook
- Weld-on hooks
- Balancers
Lifting equipment There are 581 products.
-
YALE THM Manual claw, magnetic
Capacity 120 - 170 kg The THM manual magnetic claw is used for transporting steel sheets horizontally and vertically, lifting plates from racks, pulling steel sheets out of shelving, as well as transporting flat pieces of magnetizable steel. The clamp, depending on the type, can be used for plate thicknesses from 1 to 5 mm.
-
YALE THG Hand clamp
Capacity 250 kg The THG hand clamp is suited for the individual transport of light and thin plates. Pressing down on the hand grip releases the tension spring, allowing the clamp to open and slide onto the plate. The plate can be transported by holding onto the ergonomically designed hand grip. The positive spring pressure prevents the plate from...
-
YALE TRU Roundstock grab
Capacity 100 - 4000 kg The TRU roundstock grab picks up rounds tock and pipe material up to 600 mm in diameter quickly and safely. With its optional protective lining, it can also pick up materials with sensitive surfaces.
-
YALE TR Pipe grab
Capacity 200 - 3 000 kg The TR pipe grab for rolls and pipes up to 1050 mm in diameter offers a large variety of different applications. Apart from pipe and drums laid on their side, this lightweight pipe grab will also handle rolls of paper, fabric, sheet metal and tubes.
-
YALE TPR Profile steel grab
Capacity 500 - 3 000 kg The TPR steel grab is designed for transport of girders, profile steel, etc. It boasts a large jaw capacity, which makes it useful for various flange widths. The clamping jaws press securely with a positive fit to the girder.
-
YALE TVB Block grab
Capacity 250 and 500 kg The TVB block grab is useful for the transport of stone and concrete blocks and other materials with parallel surfaces. The grab has a protective lining to ensure a safe and non-marring transport. The clamping jaw and the center of gravity are easily and quickly adjustable by means of the locking pin.
-
YALE TBG Stone / concrete grab with small...
Capacity 200 - 2 500 kg The TBG block grabs are suited for the transport of all materials with parallel surfaces that can withst and a clamping pressure twice as high as the load being lifted. The grabs are delivered with a replaceable hard rubber protective lining as standard.
-
YALE TBG Stone / concrete grab with large...
Capacity 200 - 5 000 kg The units are delivered with protective linings as standard.
-
YALE TBA Bale grab
Capacity 200 - 1 000 kg The TBA bale grab transports bales of fiber, wool, fabric, paper, pressed straw and various types of shavings up to a width of 1.3 m. Bales are gripped safely yet gently, and where applicable, the clamps are lined with a soft and pliable material.The locking pawl only engages if the grab is opened without manual intervention.
-
YALE TCO / TCU Container lifting lug
Capacity 32 000 - 56 000 kg These container lifting lugs are offered in a set of 4 pieces with a total weight capacity of 56 t. The lugs serve as flexible attachment points for the transport of containers. Two types are available which can be fastened to either the “top“ of the container or laterally. Model TCO is vertically mounted in the hole at the...
-
YALE TCS Coil hook
Capacity 500 - 3 000 kg The TCS coil hook is an universal C-Hook. Due to its tipping feature, it can lift or lower the coil, whether the coil is lying flat or is in an upright position. With this tipping device, the coil is tipped safely through 90°.
-
YALE TFA Barrel grab
Capacity 300 kg This unit grabs upright barrels and sets them down in the same position. Although the clamping jaws are fitted with a hard rubber lining to provide a friction hold, it is the positive fit on the rim that provides extra safety. This additional feature is indispensable if the surface of the barrels is stained with oil or grease.
-
YALE TFA D Barrel grab with tipping device
Capacity 300 kg The grab with tipping device is suited to lift, transportas well as tipping and emptying the barrel. In order to tip the barrel easily, it must be picked up at the correct center of gravity.
-
YALE TKA/d Crate grab with tipping device
Capacity 150 kg The crate grab with tipping device is an absolutely safe unit, which not only securely transports stacking boxes, but can empty them in mid-air as well. A safety lever system prevents the accidental opening of the grab. The clamping jaws tightly grab under the rim of the crate without damaging the crate.
-
YALE TKA a/i Crate grab
Capacity 250 kg The easy-handling crate grab, which grabs on the side plates or the front sides of the crate, transports crates safely and without damaging them. The moveable jaws press the edge of the crate gently against the outside grab support rails. Stacking boxes made of steel or plastic will not get deformed.
-
YALE TCP Trench shield grab
Capacity 1 500 - 5 500 kg The TCP grab is suitable for vertical positioning and transport ation of trench shields. Once the grab is set onto the trench shield, a springloaded bolt locks itself into the hole of the shield. Releasing the bolt is done with the 15 m pull cord attached to the grab.
-
YALE TPP Trench shield clamp
Capacity 3 000 - 12 000 kg The TPP trench shield clamp is similar to a regular plate clamp in its construction but has a much deeper jaw. The compact construction combined with a high capacity makes it ideal for pulling trench shields out of the ground. A safety lock prevents the accidental opening of the clamp.
-
YALE TKB Clamps for cable drums
Capacity 5 000 kg Specifically designed for the transport of cable drums, these clamps are used in pairs together with a two-legged chain sling. By the spreading of the clamp, it locks inside the drum. The clamps can be held in place by a locking lever. Easy handling, light-weight design, and the size of the clamp contribute to a safe transport of all...
-
-
YALE TTS-E Spreader beam, non-adjustable
Capacity 1 000 - 10 000 kg Tigrip spreader beams are the practical and safe choice for either long material to prevent sagging and shifting, or for loads where the weight has to be carefully distributed or suspended from several points. The extensive standard program offers a wide variety of capacities, working widths, adjustable ranges and hooks for...
-
YALE TTS Spreader beam
Capacity 1 000 - 3 000 kg Box pallets with DIN 15155 specifications, are usually moved around with a forklift, but are so sturdy that they can be picked up and transported with a spreader beam grab and an overhead crane hooked up to the top of the box pallet‘s frame.
-
YALE TTB Spreader beam for Big-Bags
Capacity 1 000 - 2 000 kg This four-point spreader beam in a fixed frame construction with weld-on hooks and safety latch is designed for lifting and transporting of Big-Bags.
-
YALE TKL Crane weighers - with digital...
Measuring range 0 - 12 t The crane weighers TKL are compact measuring devices for the weighing of loads. Use appropriate attachments like grade 8 forgings between the hook of the hoist or crane, the crane weigher and the load. The crane weighers have a liquid crystal display (LCD), which can tare as well as show either the gross or the net load.
-
YALE TKR Crane weighers
Measuring range 0 - 12 t The crane weighers TKR are compact measuring devices for the weighing of loads. Use appropriate attachments like grade 8 forgings between the hook of the hoist or crane, the crane weigher and the load. The crane weighers have a liquid crystal display (LCD), which can tare as well as show either the gross or the net load.
